$18 PC Products PC-Masonry Epoxy Adhesive Paste, Two-Part Repair, 8 Industrial Scientific Adhesives, Sealants Lubricants Epoxy Adhesives $18 PC Products PC-Masonry Epoxy Adhesive Paste, Two-Part Repair, 8 Industrial Scientific Adhesives, Sealants Lubricants Epoxy Adhesives /Arabianize711632.html,everything.rent,Adhesive,Paste,,Two-Part,Products,Repair,,PC,8,$18,Industrial Scientific , Adhesives, Sealants Lubricants , Epoxy Adhesives,Epoxy,PC-Masonry /Arabianize711632.html,everything.rent,Adhesive,Paste,,Two-Part,Products,Repair,,PC,8,$18,Industrial Scientific , Adhesives, Sealants Lubricants , Epoxy Adhesives,Epoxy,PC-Masonry PC Products PC-Masonry Epoxy Adhesive 8 Repair Two-Part cheap Paste PC Products PC-Masonry Epoxy Adhesive 8 Repair Two-Part cheap Paste
PC-Masonry is a two-part masonry repair epoxy adhesive paste used to replace missing concrete or fill cracks in masonry elements in indoor and outdoor applications. The epoxy is made from a non-sagging paste that can be used in horizontal and overhead applications. It can be painted, stained, and machined, and is nonconductive after it has been cured.
PC-Products, celebrating 75 years of âÂÂFixing Your ThingsâÂÂ, with quality, reliable repair products.àRepair solutions for just about anything that needs repair or what you can manage to break. From Concrete to Wood restoration and heavy duty permanent repairs, we have you covered.Yeah; We can fix that
PC-Masonry Epoxy is a two component epoxy. It is a solvent free, high strength, high modulus, moisture insensitive, non-sag epoxy. Use as a high strength adhesive for projects that require a non-sag repair with fast curing time. Ideal for larger concrete repairs, especially for spalled concrete, PC-Masonry Epoxy can be troweled over rough and deteriorating concrete. Use for rebuilding missing concrete. PC-Masonry Epoxy is ideal for vertical and even overhead repairs since it will not run, sag or drip. PC-Masonry Epoxy can be painted after cured. Use as a high strength adhesive for projects that require a non-sag repair with fast curing time. Note: PC-Masonry Epoxy may discolor after exposure to sunlight.
![]() |
![]() |
![]() |
---|---|---|
No drip or sag!Can be applied vertical, inclined or overhead, is waterproof and can be applied to wet surfaces! No drip or sag. Long working time (20 minutes at 75ðF) and easy to trowel. |
Use for various concrete fixes large or smallIdeal for larger concrete repairs, especially for spalled concrete, PC-Masonry Epoxy can be troweled to a very thin coating, if needed, over rough and deteriorating concrete. Use for rebuilding missing concrete. Anti-skid finish when cured. |
Proudly made in the USAAll PC Products are made in the USA and shipped from Allentown, PA. |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|
PC Products PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair | PC Products PC-Masonry Two-Part Masonry Repair Epoxy Adhesive Paste | PC Products PC-Xtreme Polyurea Elastomeric Crack and Joint Filler | PC Products PC-Crete Hand Moldable Concrete Epoxy Putty | |
Color Liquid / Dry | Gray / Gray | Gray / Gray | Gray / Gray | Limestone / Limestone |
Sandable / Paintable / Machinable | Yes / Yes / Yes | Yes / Yes / Yes | Yes / Yes / Yes | Yes / Yes / Yes |
Work Time / Service Time (at 70 F) | 20min / 4 hours | 20 min / 4 hours | 10 min / 1 hour | 3 min / 1 hour |
Tensile Strength | 6780 psi | 11,000 psi | N/A - Filler | 650 psi |
Can apply to wet surfaces / Waterproof after cure | Yes / Yes | Yes / Yes | Yes / No | Yes / Yes |
No drip or sag / Fill characteristics | Yes In Smaller Volume / Excellented | Yes / Excellent | No / Good | Yes / Good |
Temperature range | -20 - 200ð F | -20 - 200ð F | -50 - 200ð F | -20 - 250ð F |
Permanent repair? | Yes | Yes | Yes | Yes - Emergency |
Toxicity when cured? | No | No | No - FDA Approved | No |
Coverage - cubic inch per ounce | 1.5 | 1.5 | 1.7 | 1.5 |
Protective Coating Company was founded and incorporated in 1954 by John (Jack) Long as a service company providing customers with a waterproofing product called 'Spraycrete'. Soon afterward, our signature product PC-7 paste epoxy was developed. This product put Protective Coating Co. on the map. Today, we make a full line of repair and wood restoration products. From wood repairs to concrete repairs and most repairs in between...We have you covered.
Now in its 3rd generation, Protective Coating Co. still maintains their small town philosophy and remains a family run company committed to manufacturing quality products. Every batch of mixed material is still hand tested to insure our high standard of quality. In each of our products you will find more than just a product that performs as intended, you will find a team that stands behind their products. From Concrete to Wood restoration and heavy duty permanent repairs, we have you covered.Yeah; We can fix that!