Make sure this fits
by entering your model number.
âãHigh safetyã: Highly sensitive probe deployment with high sensitivity. Use the password to arm, only the owner can release the arming state.
âãSensitivity adjustmentã: Product factory set the sensitivity for the mid-range, in the non-armed state, long press C key to hear "drop" prompts to set the sensitivity to "high", press and hold the C key again to hear the "drop" two tips set sensitivity for the "middle", press and hold the C key again to hear the "drop" three tips to set the sensitivity to "low", continue to press the C key will cycle the above settings operation.
âãEasy to useã Simple, effective and convenient. Lightweight and compact size can be stored or carried. The standby power consumption is as low as micro-level, and the battery life is long.
âãResetable passwordã:A resettable 4-digit code, you can reset the combination as many times as you need, thus providing higher safety for the bicycle.
Unarmed:Enter the correct four-digit password, you can lift the deployment,then you can hear the "drop" three prompts, if the password is wrong, then a long tone prompts to enter the wrong. In any state, enter the wrong password four times in succession, the system will lock the keyboard, automatically unlock after 3 minutes.In the arming state, the anti-theft device to feel the vibration issued a short alarm 5 times, if again within 5 seconds by vibration, the continuous alarm sound 15 seconds.
|||
Product description
Password settings and changes: 1. The default password for the product factory is: "ABCA", in the non-armed state, the user can press. 2. The following method changes to your own password: long press A key for about 3 seconds, hear the "drop" of the sound, enter the old password, if the password is correct, will hear the "drop" three prompts correct, it is needed in 5 seconds to start entering four new passwords, if the change is successful, will hear the "drop" three voice prompts. If you enter the old password error or modify the new password is unsuccessful, then the long sound back secret code to modify the state, then the need for the new operation. 3. If remove the battery for about 30 seconds, the system automatically restore the factory default password: "ABCA".
Armingï¼Hold down the B button for about 3 seconds, hear the "drop" of a prompt to enter the arming state, 5 seconds after the start of alert.
Specifications: Material: ABS Color: Black Package Weight: approx. 88g Size: approx. 9.5 x 6.5 x 3.7cm / 3.74" x 2.55" x 1.45" Battery: 1 x 9V 6F22 battery (not included) Working Current: lt;100mA Sound: gt;105db Operating Temperature: -15â-75â Storage Temperature: -40â-85â Environment Humidity: 5%-98% Package Included: 1 x bike code lock 4 x screws 2 x nuts Note: 1. The correct installation of this product is waterproof, but not immersed in water. 2. It is recommended to use 9V alkaline. In some cold areas of winter, please use the cold good performance battery, replace the new battery when the alarm volume is reduced. 3. When not in use for a long time, remove the battery to avoid damage to the product due to battery leakage.
This website uses cookies and sends them to third parties to send you tailor-made ads according to your preferences. By closing this banner, navigating away from this page or clicking on any element on the page you confirm that you accept cookies. If you want to learn more: Cookie Info – Privacy Policy